Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH (for Hatchback)

VSC OFF SWITCH (for Hatchback) > INSPECTION



1. INSPECT VSC OFF SWITCH


    C169941E05
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (VSC OFF Switch)
    Standard Resistance 
    Tester Connection
    Switch Condition
    Specified Condition
    6 (OFF) - 3 (E)
    Pressed
    Below 1 Ω
    Not pressed
    10 kΩ or higher
    If the result is not as specified, replace the VSC OFF switch.