WASHER MOTOR (for Hatchback Front Side) > INSPECTION |
| 1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY |
Disconnect the windshield washer motor and pump connector.
Fill the washer jar with washer fluid.
![]() |
Check to ensure that the windshield washer motor and pump operates when the battery voltage is applied between the terminals.
| *a | Component without harness connected (Windshield Washer Motor and Pump Assembly) |
| Measurement Condition | Specified Condition |
| Battery positive (+) → 1 Battery negative (-) → 2 | Washer fluid flows from the washer jar. |