Home › Vehicle Exterior › DOOR / HATCH › HOOD (for Sedan)

HOOD (for Sedan) > DISASSEMBLY



1. REMOVE HOOD TO RADIATOR SUPPORT SEAL

HINT:
Use the same procedure for both sides.



    B348850
  1. Remove the 2 clips and the hood to radiator support seal.



2. REMOVE HOOD STOPPER

HINT:
Use the same procedure for both sides.



    B348849
  1. Disengage the 2 claws and remove the hood stopper.



3. REMOVE HOOD CUSHION

HINT:
Use the same procedure for both sides.



    B287944
  1. Rotate counterclockwise and remove the hood cushion.