BLOWER RESISTOR (for Hatchback) > INSPECTION |
| 1. INSPECT BLOWER RESISTOR |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 4 | Always | 3.12 to 3.60 Ω |
| 3 - 4 | Always | 1.45 to 1.67 Ω |
| 2 - 4 | Always | 0.52 to 0.60 Ω |
| *a | Component without harness connected (Blower Resistor) |