THEFT WARNING ECU (for Sedan) > INSTALLATION |
| 1. INSTALL THEFT WARNING ECU ASSEMBLY |
Install the theft warning ECU assembly with the bolt.
Connect the connector.
| 2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() |
Engage the claws of the hinge portions by pushing the glove compartment door in the horizontal direction to install the glove compartment door assembly.
![]() |
Slightly flex the upper portion of the glove compartment door assembly to engage the stopper.
Install the 2 glove compartment door stoppers onto the glove compartment door.