THEFT WARNING ECU (for Sedan) > REMOVAL |
| 1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() |
Disengage the claw and separate the 2 glove compartment door stoppers from the glove compartment door.
Slightly flex the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door assembly until it becomes horizontal.
![]() |
Pull the glove compartment door assembly out horizontally to disengage the hinge portion and remove the glove compartment door.
| 2. REMOVE THEFT WARNING ECU ASSEMBLY |
Disconnect the connector.
![]() |
Remove the bolt and remove the theft warning ECU assembly.