Home › General › SPECIFICATIONS › 1NZ-FE INTAKE / EXHAUST (for Hatchback)

1NZ-FE INTAKE / EXHAUST (for Hatchback) > TORQUE SPECIFICATIONS



Part Tightened
N*m
kgf*cm
ft.*lbf
Intake manifold x Cylinder head sub-assembly
30
306
22
Wire harness bracket x Intake manifold
11
112
8
Stud bolt x Intake manifold
4.0
41
35 in.*lbf
Front floor center brace x Body
30
307
22
No. 1 exhaust manifold heat insulator x Exhaust manifold
8.0
82
71 in.*lbf
Exhaust manifold x Cylinder head sub-assembly
27
275
20
Manifold support bracket x Exhaust manifold x Cylinder head sub-assembly
44
449
33
Heated oxygen sensor x Exhaust manifold
without SST
44
449
33
with SST
40
408
30
Tail exhaust pipe assembly x Front exhaust pipe assembly
43
438
32
Front exhaust pipe assembly x Exhaust manifold
43
438
32
Exhaust tail pipe assembly x Front exhaust pipe assembly
43
438
32