Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER (for Hatchback)

COMBINATION METER (for Hatchback) > INSTALLATION



1. INSTALL COMBINATION METER ASSEMBLY
  1. Connect the 2 connectors.

  1. Engage the 2 guides and 2 clips.

  1. Install the combination meter assembly with the 2 screws.



2. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL
  1. Engage the 2 claws and 5 clips and install the instrument panel finish panel.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



4. INSPECT SRS WARNING LIGHT
(Click here)