COMBINATION METER (for Hatchback) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL |
![]() |
Disengage the 5 clips and remove the instrument cluster finish panel.
| 4. REMOVE COMBINATION METER ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the 2 clips and the 2 guides.
![]() |
Disconnect the 2 connectors and remove the combination meter assembly.