Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEREO JACK ADAPTER ASSEMBLY (for Hatchback)

STEREO JACK ADAPTER ASSEMBLY (for Hatchback) > REMOVAL



1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    B284269
  1. Disengage the claw and separate the glove compartment door stopper from the glove compartment door.

  1. Slightly flex the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.



    B284270E02
  1. Pull the glove compartment door out horizontally to disengage the 2 hinges and 3 guides and remove the glove compartment door.
    Text in Illustration 
    *a
    Hinge
    *b
    Guide

    NOTICE:
    Pull the glove compartment door out horizontally. Otherwise, the hinge may be damaged, making re-installation impossible.



2. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    E229067
  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the No. 1 stereo jack adapter assembly.