Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH (for Hatchback)

REAR POWER WINDOW SWITCH (for Hatchback) > INSTALLATION



1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B272652
  1. Engage the 2 claws and install the rear power window regulator switch.



2. INSTALL REAR DOOR ARMREST BASE UPPER PANEL


    B271671
  1. Connect the connector.

  1. Engage the 9 claws and the 3 guides, and install the rear door armrest base upper panel.