Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
V12-1 (HO) - Terminal B
| Always
| Below 2.5 Ω
|
V12-10 (AU1) - V12-8 (EAU)
| No switch pushed
| 95 to 105 kΩ
|
V12-9 (AU2) - V12-8 (EAU)
| No switch pushed
| 95 to 105 kΩ
|
V12-10 (AU1) - V12-8 (EAU)
| Volume+ switch: pushed
| 950 to 1050 Ω
|
V12-9 (AU2) - V12-8 (EAU)
| Volume+ switch: pushed
| 95 to 105 kΩ
|
V12-10 (AU1) - V12-8 (EAU)
| Volume- switch: pushed
| 2955 to 3265 Ω
|
V12-9 (AU2) - V12-8 (EAU)
| Volume- switch: pushed
| 95 to 105 kΩ
|
V12-10 (AU1) - V12-8 (EAU)
| Seek+ switch: pushed
| Below 2.5 Ω
|
V12-9 (AU2) - V12-8 (EAU)
| Seek+ switch: pushed
| 95 to 105 kΩ
|
V12-10 (AU1) - V12-8 (EAU)
| Seek- switch: pushed
| 313 to 345 Ω
|
V12-9 (AU2) - V12-8 (EAU)
| Seek- switch: pushed
| 95 to 105 kΩ
|
V12-10 (AU1) - V12-8 (EAU)
| Mode switch: pushed
| 95 to 105 kΩ
|
V12-9 (AU2) - V12-8 (EAU)
| Mode switch: pushed
| Below 2.5 Ω
|