Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR INLET CONTROL SERVO MOTOR (for Hatchback)

AIR INLET CONTROL SERVO MOTOR (for Hatchback) > INSPECTION



1. INSPECT NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    I107074E01
  1. Apply battery voltage to the blower damper servo and check the operation of the motor.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 1 Blower Damper Servo Sub-assembly)
    *b
    Fresh side
    *c
    Recirculation side

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 5
    Battery negative (-) → Terminal 1
    Turns to the "RECIRCULATION" side smoothly
    Battery positive (+) → Terminal 5
    Battery negative (-) → Terminal 2
    Turns to the "FRESH" side smoothly

    1. If the result is not as specified, replace the blower damper servo.