Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY (for TMMF Made Hatchback)

FRONT DRIVE SHAFT ASSEMBLY (for TMMF Made Hatchback) > INSPECTION



1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    C205473
  1. Check for noticeable looseness when turning the joint up and down, left and right, and in the thrust direction.

  1. Check for cracks, damage and grease leakage on the boot joint.

    HINT:
    Keep the drive shaft level while moving it.



    C205466E01
  1. Check dimension (A).

    Dimension (A):
    LH
    RH
    561.8 mm (1.84 ft.)
    803.8 mm (2.64 ft.)