REFRIGERANT LINE (for Hatchback) > REMOVAL |
| 1. REMOVE PIPING CLAMP |
![]() |
While pressing the end of the suction hose into the end of the air conditioner tube and accessory, use pliers to squeeze together both sides of the piping clamp until it breaks apart.
| *1 | Air Conditioner Tube and Accessory |
| *2 | Suction Hose |
| *3 | Piping Clamp |
| *a | Press In |
Separate the suction hose.
Remove the 2 O-rings from the suction hose.