Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for Hatchback)

BRAKE BOOSTER (for Hatchback) > DISASSEMBLY



1. REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
  1. Loosen the push rod lock nut and remove the brake master cylinder push rod clevis and push rod lock nut from the brake booster assembly.



2. REMOVE BRAKE VACUUM CHECK VALVE ASSEMBLY


C234648
  1. Remove the vacuum check valve from the brake booster assembly.

  1. Remove the check valve grommet from the brake booster assembly.