Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for Hatchback)

BRAKE PEDAL (for Hatchback) > DISASSEMBLY



1. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER


    C234640
  1. Remove the stop light switch mounting adjuster from the pedal support.



2. REMOVE BRAKE PEDAL SUB-ASSEMBLY
  1. Remove the nut and brake pedal shaft and remove the brake pedal from the pedal support.



3. REMOVE BRAKE PEDAL BUSH
  1. Remove the 2 brake pedal bushes from the brake pedal.



4. REMOVE BRAKE PEDAL PAD
  1. Remove the brake pedal pad from the brake pedal.