FRONT DOOR WINDOW FRAME MOULDING (for Hatchback Front Side) > INSTALLATION |
| 1. INSTALL FRONT DOOR WINDOW FRAME FRONT MOULDING |
Clean the attachment surface.
Using an infrared light, heat the adhesive remaining on the body.
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
Using a piece of cloth, rub the remaining adhesive off the body.
Using a non-residue solvent, clean the attachment surface.
Remove the release paper from the front door window frame front moulding.
Engage the 2 guides, claw and install a new front door window frame front moulding.