Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › TELLTALE LIGHT ASSEMBLY (for Hatchback)

TELLTALE LIGHT ASSEMBLY (for Hatchback) > REMOVAL



1. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY


    B290457E01
  1. Disengage the 10 clips and the 4 guides and remove the instrument cluster finish panel garnish.

    HINT:
    Disengage the clips in order starting from the outside of the vehicle.

    NOTICE:
    To prevent parts from breaking, do not pull on section A when disengaging the clips.



2. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY


    B290426
  1. Disengage the 7 clips.

  1. Disconnect the connector and remove the instrument cluster finish center panel.



3. REMOVE TELLTALE LIGHT ASSEMBLY


    B291210
  1. Disengage the 2 claws to remove the telltale light assembly from instrument cluster finish center panel sub-assembly.