Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT (for Hatchback)

BLOWER UNIT (for Hatchback) > DISASSEMBLY



1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    I106209
  1. Disengage the 2 claws and 2 guides, and remove the air duct.



2. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    I100751
  1. Remove the 2 screws and the blower damper servo.



3. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    I101208
  1. Remove the 3 screws and the blower motor.



4. REMOVE BLOWER RESISTOR


    I101599
  1. Remove the 2 screws and the blower resistor.



5. REMOVE AIR FILTER CASE


    I106212E01
  1. Pinch portion A to disengage the claw and remove the air filter case.



6. REMOVE CLEAN AIR FILTER


    I106213
  1. Remove the clean air filter from the blower.