Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT (for Hatchback)

BLOWER UNIT (for Hatchback) > REASSEMBLY



1. INSTALL CLEAN AIR FILTER


    I106214
  1. Install the clean air filter into the blower.

    NOTICE:
    Install the clean air filter with its UP marks oriented in the correct direction.



2. INSTALL AIR FILTER CASE


    I106215E01
  1. Insert the rib of the air filter case into the blower unit.

    NOTICE:
    Install the air filter case with its UP mark oriented in the correct direction.

  1. Pinch portion A to engage the claw and install the air filter case.



3. INSTALL BLOWER RESISTOR


    I101599
  1. Install the blower resistor with the 2 screws.



4. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    I101208
  1. Install the blower motor with the 3 screws.



5. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    I100751
  1. Install the blower damper servo with the 2 screws.



6. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


    I106209
  1. Engage the 2 claws and 2 guides, and install the air duct.