SIDE MUDGUARD (for Hatchback) > INSTALLATION |
| 1. INSTALL SIDE MUDGUARD PROTECTOR |
Using a piece of cloth, rub the remaining double-sided adhesive tape off the side mudguard protector.
Using a non-residue solvent, clean the attachment surface.
Apply Primer M to the installation part of the side mudguard.
Install a new side mudguard protector onto the side mudguard.
| 2. INSTALL SIDE MUDGUARD REAR PROTECTOR |
Using a piece of cloth, rub the remaining double-sided adhesive tape off the side mudguard rear protector.
Using a non-residue solvent, clean the attachment surface.
Apply Primer M to the installation part of the side mudguard.
Install a new side mudguard rear protector onto the side mudguard.
| 3. INSTALL SIDE MUDGUARD SUB-ASSEMBLY |
Engage the 7 clips and install the side mudguard.
Install the 8 retainers.
Tighten the screw.
| 4. INSTALL ROCKER PANEL MOULDING COVER |
Engage the 2 claws and install the rocker panel moulding cover.