TIRE PRESSURE WARNING RESET SWITCH (for Hatchback) > INSTALLATION |
| 1. INSTALL TIRE PRESSURE WARNING RESET SWITCH |
Engage the 2 claws to install the tire pressure warning reset switch to the No. 1 instrument panel under cover sub-assembly.
Connect the tire pressure warning reset switch connector.
| 2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Engage the guide and the claw.
Install the No. 1 instrument panel under cover sub-assembly with the 2 screws.
| 3. INSPECT TIRE PRESSURE WARNING SYSTEM |
| 4. PERFORM INITIALIZATION |