With the radiator support removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
| *A | LH | - | - |
| *A | RH | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Assembly Mark |
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
For positioning of the new parts, align the installation standard holes of the front side member extension sub-assembly and the member.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *A | LH | - | - |
| *1 | FRONT SIDE MEMBER EXTENSION SUB-ASSEMBLY | *2 | FRONT SIDE MEMBER EXTENSION |
| *A | RH | - | - |
| *1 | FRONT SIDE MEMBER EXTENSION SUB-ASSEMBLY | *2 | FRONT SIDE MEMBER EXTENSION |