REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
| *A | LH Side | *B | RH Side |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
Measure the dimensions before installing the headlights.
| *A | LH Side | *B | RH Side |
| *1 | RADIATOR SUPPORT UPPER | *2 | RADIATOR SUPPORT ASSEMBLY |
|
N*m (kgf*cm, ft.*lbf) : Specified torque | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 1272 mm (50.08 in.) | B | 924 mm (36.38 in.) |
| C | 909 mm (35.79 in.) | D | 712 mm (28.03 in.) |
| E | 764 mm (30.08 in.) | F | 851 mm (33.50 in.) |