Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL SEALING › 2013.08–2014.03
BM30M0E _01 Vehicle Exterior _068873 PAINTING / COATING _0336228 BODY PANEL SEALING F

PAINTING / COATING  BODY PANEL SEALING  APPLICATION AREAS  


1.

Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.


HINT:
·

Apply degreasing agent to a clean cloth and clean the sealer application areas.


·

After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.


·

If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.



K110022

Flat Finishing
K110023

No Flat Finishing

K141659

K141660

K144002

K144003C01
0.469,3.771 0.781,3.927 0.313,0.156 10 false *A 0.479,6.271 0.792,6.427 0.313,0.156 10 false *B 4.24,3.781 4.552,3.938 0.313,0.156 10 false *C 4.219,6.281 4.531,6.438 0.313,0.156 10 false *D
*A w/o Side Mudguard *B w/ Side Mudguard
*C LH Side *D RH Side


K141662

K141663