Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH(for Hatchback) › from 2014.03
BM30M0E _01 Vehicle Exterior _068871 BODY PANEL _0336239 BACK DOOR OPENING TROUGH(for Hatchback) F

BODY PANEL  BACK DOOR OPENING TROUGH(for Hatchback)  CUT AND JOIN REPLACEMENT SECTIONS  


K108878

With the quarter panel and body lower back panel removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location


K141689C01
3.688,1.542 5.219,1.74 1.531,0.198 10 false 120 (4.72) 0.292,8.51 0.604,8.708 0.313,0.198 10 false *a
*a mm (in.) - -


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K141690C01
3.302,4.198 3,4.198 3,4.198 3.365,3.646 false 3.344,4.094 3.656,4.292 0.313,0.198 10 false *1
*1 BACK DOOR OPENING SIDE REINFORCE SUB-ASSEMBLY - -