With the body lower back panel removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
| *A | LH | - | - |
| *A | RH | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
|
Assembly Mark |
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
For positioning of the new parts, align the installation standard holes of the rear floor side member rear and the member.
After welding, apply undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *A | LH | - | - |
| *1 | REAR FLOOR SIDE MEMBER REAR | *2 | TRANSPORT HOOK SUB-ASSEMBLY REAR |
| *A | RH | - | - |
| *1 | REAR FLOOR SIDE MEMBER SUB-ASSEMBLY REAR | - | - |