Home › Vehicle Exterior › BODY PANEL › REAR DOOR OUTER PANEL(for Sedan) › 2014.03–2017.10
BM30M0E _01 Vehicle Exterior _068871 BODY PANEL _0336202 REAR DOOR OUTER PANEL(for Sedan) F

BODY PANEL  REAR DOOR OUTER PANEL(for Sedan)  ASSEMBLY REPLACEMENT  


K111558

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108832

Brazing or Arc Brazing for Removal


REMOVAL POINT
1.

Before removing the outer panel, mark the installation position with tape.

2.

Before removing the outer panel, establish its exact position in relation to the window frame using a reference marker, etc.

3.

After grinding off the hemming location, remove the outer panel.


K111559C01
3.813,7.479 4.083,7.917 4.083,7.917 4.333,7.917 false 2.719,1.698 2.5,1.333 2.5,1.333 2.25,1.333 false 2.083,1.25 2.396,1.406 0.313,0.156 10 false *a 4.385,7.844 4.698,8 0.313,0.156 10 false *b 3.115,1.875 3.427,2.031 0.313,0.156 10 false *c 3.51,5.865 3.823,6.021 0.313,0.156 10 false *d
*a Positioning Tape *b Disc Sander
*c Installation Position *d Hemming Location


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108832

Braze
K108833

Spot MIG Weld
K108834

Body Sealer


INSTALLATION POINT
1.

Before temporarily installing the new parts, apply body sealer to the reinforcement, side impact protection beam and backside of the new parts.

NOTICE:

Do not close the drain hole.


HINT:

Apply sealer evenly about 10 mm (0.39 in.) from the flange and 3 mm (0.12 in.) in diameter on the outer panel and apply just enough sealer for the reinforcement and side impact protection beam to make contact.


2.

Bend the flange hem with a wooden hammer and dolly.

HINT:

Bend the panel gradually so as not to distort it.


3.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K111560C01
2.25,3.833 2,3.833 2,3.833 2.167,3.427 false 1.583,1.313 1.333,0.917 1.333,0.917 1.083,0.917 false 5.333,7.25 5.083,7.25 5.083,7.25 5.333,6.583 false 5.833,5.76 6,5.167 6,5.167 6.25,5.167 false 6.5,6.75 6.25,6.75 6.25,6.75 6.031,6.115 false 2.302,3.76 2.615,3.917 0.313,0.156 10 false *1 0.917,0.833 1.229,0.99 0.313,0.156 10 false *a 6.292,5.083 6.604,5.24 0.313,0.156 10 false *b 6.552,6.667 6.865,6.823 0.313,0.156 10 false *c 5.385,7.167 5.698,7.323 0.313,0.156 10 false *d 6.021,3.333 6.333,3.49 0.313,0.156 10 false *e 0.25,8.51 0.563,8.667 0.313,0.156 10 false *f 3.917,1.146 4.521,1.365 0.604,0.219 10 false 5 (0.20) 4.813,1.646 5.479,1.906 0.667,0.26 10 false 10 (0.39)
*1 REAR DOOR PANEL OUTER - -
*a Positioning Tape *b Cloth Tape
*c Dolly *d Wooden Hammer
*e Drain Hole *f mm (in.)