Home › Vehicle Exterior › BODY DIMENSIONS › ENGINE COMPARTMENT REFERENCE VALUES(for Sedan) › 2017.10–2018.01
BM30M0E _01 Vehicle Exterior _068872 BODY DIMENSIONS _0336252 ENGINE COMPARTMENT REFERENCE VALUES(for Sedan) F

BODY DIMENSIONS  ENGINE COMPARTMENT REFERENCE VALUES(for Sedan)  THREE-DIMENSIONAL DISTANCE  


HINT:
·

Measure points with the radiator cover removed.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



for TMMIN Made


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Radiator Protector Bolt M6 (0.24)
B, b Headlight Installation Screw -
C, c Front Fender Installation Bolt M6 (0.24)
D, d Front Fender Installation Bolt M6 (0.24)

K141781C01
2.802,7.24 3.115,7.396 0.313,0.156 10 false *a 0.188,8.51 0.5,8.667 0.313,0.156 10 false *b
*a Distance between points other than those above *b mm
(in.)



for TMT Made


Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Radiator Protector Bolt M6 (0.24)
B, b Headlight Installation Screw -
C, c Front Fender Installation Bolt M6 (0.24)

K141905C01
0.083,8.667 0.396,8.823 0.313,0.156 10 false *a
*a mm
(in.)
- -