With the quarter panel removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Remove Weld Points |
*a and *b are reused.
After removing the *a and *b, remove the quarter wheel house panel outer.
| *A | for TMMIN Made | *B | LH |
| *a | Reused | *b | Reused |
| *A | for TMMIN Made | *B | LH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | for TMMIN Made | *B | RH |
| *a | Reused | *b | Reused |
| *A | for TMMIN Made | *B | RH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | for TMT Made | *B | LH |
| *a | Reused | *b | Reused |
| *A | for TMT Made | *B | LH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | for TMT Made | *B | RH |
| *a | Reused | *b | Reused |
| *A | for TMT Made | *B | RH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Spot Weld |
|
Plug Weld |
|
Plug Weld |
|
Plug Weld |
|
Body Sealer |
|
Assembly Mark |
When welding *a, make a hole on a new part for plug welding and weld the panel with the panel behind completely.
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
After welding the quarter wheel house panel outer to the vehicle side, install the *b and *c.
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *A | for TMMIN Made | *B | LH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | for TMMIN Made | *B | LH |
| *A | for TMMIN Made | *B | RH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | for TMMIN Made | *B | RH |
| *A | for TMT Made | *B | LH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | for TMT Made | *B | LH |
| *A | for TMT Made | *B | RH |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | - | - |
| *A | for TMT Made | *B | RH |