Home › Vehicle Exterior › BODY PANEL › QUARTER PANEL END HOUSING(for Sedan) › 2017.10–2018.01
BM30M0E _01 Vehicle Exterior _068871 BODY PANEL _0336206 QUARTER PANEL END HOUSING(for Sedan) F

BODY PANEL  QUARTER PANEL END HOUSING(for Sedan)  ASSEMBLY REPLACEMENT  


K108406

With the quarter panel removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108832

Brazing or Arc Brazing for Removal


K141632C01
0.333,0.333 0.646,0.531 0.313,0.198 10 false *A
*A for TMMIN Made - -


K141973C01
0.333,0.333 0.646,0.531 0.313,0.198 10 false *A
*A for TMT Made - -


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108832

Braze


INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

When welding *a, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

4.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K141633C02
0.813,4.177 0.552,4.177 0.552,4.177 1.063,3.313 false 0.844,4.115 1.083,4.281 0.24,0.167 10 false *1 2.021,0.552 2.26,0.719 0.24,0.167 10 false *a 0.333,0.333 0.646,0.531 0.313,0.198 10 false *A
*A for TMMIN Made - -
*1 LUGGAGE COMPARTMENT OPENING TROUGH - -


K141974C02
0.667,4.5 0.5,4.5 0.5,4.5 0.99,3.542 false 0.75,4.427 1.063,4.583 0.313,0.156 10 false *1 1.635,0.51 1.885,0.708 0.25,0.198 10 false *a 0.333,0.333 0.646,0.531 0.313,0.198 10 false *A
*A for TMT Made - -
*1 LUGGAGE COMPARTMENT OPENING TROUGH - -