REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Brazing or Arc Brazing for Removal |
| *A | for TMMIN Made | - | - |
| *A | for TMMIN Made | *B | LH Side |
| *C | RH Side | - | - |
| *A | for TMT Made | - | - |
| *A | for TMT Made | *B | LH Side |
| *C | RH Side | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Braze |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *A | for TMMIN Made | - | - |
| *1 | BODY LOWER BACK PANEL SUB-ASSEMBLY | - | - |
| *A | for TMMIN Made | *B | LH Side |
| *C | RH Side | - | - |
| *A | for TMT Made | - | - |
| *1 | BODY LOWER BACK PANEL SUB-ASSEMBLY | - | - |
| *A | for TMT Made | *B | LH Side |
| *C | RH Side | - | - |