With the rear floor side panel removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Cut with Disc Sander etc. |
*a is reused.
After removing the *a, remove the rear floor pan.
| *A | LH | *B | RH |
| *a | Reused | - | - |
| *1 | REAR FLOOR PAN | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Fillet Weld |
Before temporarily installing the new parts, weld the rear floor pan and spare wheel clamp bracket with the standard number of welding points.
After welding the rear floor pan to the vehicle side, install the *a.
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
| *1 | REAR FLOOR PAN | *2 | SPARE WHEEL CLAMP BRACKET |
| *A | LH | *B | RH |
| *b | mm (in.) | - | - |