Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.
Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.
Wipe off the remaining double-sided tape using a clean cloth or equivalent.
If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.
After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.
The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.
COMPONENTS
| *A | for Type A | *B | for Type B |
| *C | for Type C | *D | w/ Brand Name Plate |
| *E | w/o Brand Name Plate | *F | w/ Engine Displacement Mark |
| *1 | LUGGAGE COMPARTMENT DOOR EMBLEM | *2 | NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE |
| *3 | NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE | *4 | NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE |
| *5 | NO. 4 LUGGAGE COMPARTMENT DOOR PLATE | - | - |
| ● | Non-reusable part | - | - |
NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (w/ Brand Name Plate)
| *1 | Luggage Compartment Door Panel | - | - |
| Mark | Measurement (along surface) | Mark | Measurement (along surface) |
|---|---|---|---|
| A | 38.8 mm (1.528 in.) | B | 22.3 mm (0.878 in.) |
| C | 63.4 mm (2.496 in.) | - | - |
NO. 4 LUGGAGE COMPARTMENT DOOR PLATE
for Type A:
| *A | w/o Brand Name Plate | *B | w/ Brand Name Plate |
| *C | w/ Engine Displacement Mark | - | - |
| *1 | Luggage Compartment Door Panel | - | - |
| Mark | Measurement (along surface) | Mark | Measurement (along surface) |
| A | 84.9 mm (3.343 in.) | B | 65.7 mm (2.587 in.) |
| C | 71.0 mm (2.795 in.) | D | 56.9 mm (2.240 in.) |
| E | 37.8 mm (1.488 in.) | F | 52.7 mm (2.075 in.) |
| G | 38.3 mm (1.508 in.) | H | 37.7 mm (1.484 in.) |
| I | 22.0 mm (0.866 in.) | - | - |
for Type B:
| *A | w/o Brand Name Plate | *B | w/ Brand Name Plate |
| *C | w/ Engine Displacement Mark | - | - |
| *1 | Luggage Compartment Door Panel | - | - |
| Mark | Measurement (along surface) | Mark | Measurement (along surface) |
| A | 84.7 mm (3.334 in.) | B | 65.3 mm (2.570 in.) |
| C | 70.6 mm (2.779 in.) | D | 56.8 mm (2.236 in.) |
| E | 37.4 mm (1.472 in.) | F | 52.3 mm (2.059 in.) |
| G | 37.6 mm (1.480 in.) | H | 37.3 mm (1.469 in.) |
| I | 21.6 mm (0.850 in.) | - | - |
for Type C:
| *A | w/o Engine Displacement Mark | *B | w/ Engine Displacement Mark |
| *1 | Luggage Compartment Door Panel | - | - |
| Mark | Measurement (along surface) | Mark | Measurement (along surface) |
| A | 60.4 mm (2.378 in.) | B | 41.4 mm (1.630 in.) |
| C | 57.2 mm (2.252 in.) | D | 45.9 mm (1.807 in.) |
| E | 41.4 mm (1.630 in.) | F | 26.4 mm (1.039 in.) |
NO. 3 LUGGAGE COMPARTMENT DOOR NAME PLATE (w/ Engine Displacement Mark)
| *1 | Luggage Compartment Door Panel | - | - |
| Mark | Measurement (along surface) | Mark | Measurement (along surface) |
| A | 37.7 mm (1.484 in.) | B | 73.1 mm (2.878 in.) |
| C | 55.5 mm (2.185 in.) | - | - |
NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
w/ Brand Name Plate
| *1 | Luggage Compartment Door Panel | - | - |
| Mark | Measurement (along surface) | Mark | Measurement (along surface) |
| A | 70.4mm (2.772 in.) | B | 15.3 mm (0.602 in.) |
| C | 28.7mm (1.130 in.) | - | - |
w/o Brand Name Plate
| *1 | Luggage Compartment Door Panel | - | - |
| Mark | Measurement (along surface) | Mark | Measurement (along surface) |
| A | 39.4 mm (1.551 in.) | B | 21.3 mm (0.838 in.) |
| C | 87.3 mm (3.437 in.) | - | - |
LUGGAGE COMPARTMENT DOOR EMBLEM
| *a | Location Pin |