FUNCTION OF MAIN COMPONENTS
The main components in the power door lock control system have the following functions:
| Component | Outline | |
|---|---|---|
|
*: Models without smart entry and start system |
||
| Door Courtesy Light Switch Assembly | Detects whether the doors are open or closed and sends this information to the body computer. | |
| Door Lock Assembly | Door Lock Position Switch | Detects whether the door is locked or unlocked and sends this information to the body computer. |
| Door Lock Motor | Drives the motor in response to signals from the body computer and locks or unlocks the doors. | |
| Key-linked Switch | Sends a lock or unlock request signal to the body computer by the key. | |
| Power Window Regulator Master Switch Assembly | Door Lock Switch | Sends manual lock and unlock request signals to the body computer. |
| Unlock Warning Switch Assembly* | Detects whether or not the ignition key is inserted into the ignition key cylinder and sends this information to the body computer. | |
| Body Computer | Drives all door lock motors in response to signals. | |
FUNCTION
The power door lock control system has the following functions:
| Function | Outline |
|---|---|
|
*1: Models without smart entry and start system *2: Models with smart entry and start system |
|
| Manual Lock and Unlock | This function can lock or unlock all doors by operation of the door lock switch. |
| Manual Unlock Prohibition | Performing the door lock operation with a door control transmitter assembly*1 or an electrical key transmitter sub-assembly*2 will prohibit the doors from being unlocked by the door lock control switch. |
| Key-linked Lock and Unlock | This function, linked with the driver door key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected. |
| Key Confinement Prevention | When the key is inserted in the ignition key cylinder*1 and the door lock operation is performed while the driver door is open, all the doors will be unlocked. |