OUTLINE
An analog display type combination meter is used.
The multi-information display whose display items can be changed by pressing the ODO/TRIP DISP switch, along with the shift position indicator* and a clock are provided in the Liquid Crystal Display (LCD) on the center section of the combination meter assembly.
A meter ECU and buzzer are enclosed in the combination meter assembly. This meter ECU maintains communication with other ECUs through the CAN.
Eco Driving Indicator Light informs the driver of whether the acceleration is Eco-friendly or not, is used on the automatic transaxle models.
*: Models with automatic transaxle
| *A | Except Sport Grade | *B | Models with Automatic Transaxle |
| *1 | Speedometer | *2 | Tachometer |
| *3 | Fuel Gauge | *4 | Multi-information Display |
| *5 | Eco Driving Indicator Light | *6 | ODO/TRIP DISP Switch |
| *A | Sport Grade | - | - |
| *1 | Speedometer | *2 | Tachometer |
| *3 | Fuel Gauge | *4 | Multi-information Display |
| *5 | Eco Driving Indicator Light | *6 | ODO/TRIP DISP Switch |
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |