CONSTRUCTION
A compact and lightweight 10-cylinder swash plate type cooler compressor assembly is used.
| *1 | Piston | *2 | Pulley |
| *3 | Shaft | *4 | Swash Plate |
| *5 | Rotary Valve | *6 | Cylinder |
A rotary valve capable of directing suction refrigerant into the cylinder has been provided.
A hollow shaft is used in the valve so as to allow refrigerant to be sucked into the compressing section of the cylinder through the hollow section. Holes individually arranged on the shaft and cylinder are designed to align during the rotation of the shaft. When the holes are aligned, refrigerant is sucked into the compressing section.
| *1 | Cylinder | *2 | Cylinder Suction Passage |
| *3 | Shaft | *4 | Rotary Valve Suction Port |
| *a | The position where the rotary valve suction port and cylinder suction passage become aligned. | - | - |
|
Refrigerant Flow | - | - |