OUTLINE
Safety Features
The impact absorbing structure minimizes cabin deformation by effectively helping to absorb the impact energy in the event of a front or side collision. This provides high performance occupant protection.
Aerodynamics
Various types of airflow routing parts that control airflow are provided under the floor, and an undercover is provided to make the under-floor area flat in order to ensure excellent aerodynamic performance.
Lightweight and Highly Rigid Body
Using high strength steel sheet and ultra high strength steel sheet ensures high rigid body while maintaining a lightweight structure.
Rust-resistant Body
Rust-resistant performance is enhanced by extensive use of anti-corrosion steel sheet, as well as by an anti-corrosion treatment that includes the application of anti-rust wax, sealer and anti-chipping paint to easily corroded parts such as the hood and rocker panel.
Sound Absorbing and Vibration Damping Material
Effective application of vibration damping and noise suppressant materials reduces engine, wind and road noise.
Body Shell
By optimizing the frame joint structure and the positioning of the reinforcement members, the vehicle's rigidity is ensured.
MAIN FEATURES
Exterior Design (Front View)
Creates a powerful and impacting impression by emphasizing "Under Priority"*1 the dynamic trapezoidal under grille shape.
Following the line of the radiator grille, the headlight assemblies wrap far back around to the sides and are pierced by the chrome-accented bars of the grille, making the vehicle appear wider than its actual dimensions.
A "Keen Look"*2 is expressed by a combination of the emphasis on the overall hood with its focus on the Toyota mark and dynamic Toyota "Under Priority".
*1: A front design with a strong emphasis on the lower grille in consideration of aerodynamics, cooling performance and pedestrian protection performance.
*2: A Toyota original front expression that provides a bright, intelligent and dynamic impression.
| *1 | Radiator Grille | *2 | Headlight Assembly |
Exterior Design (Side View)
The base of the front pillars has been pushed forward while the rear pillar bases have been pushed backward to create a long, sleek cabin.
The axis of the lower body has been raised, and a long, straight line runs the whole length of the body, giving the vehicle a large, impressive appearance. The long lower body is combined with the upper body which is then tapered to the front and the rear at plain view, expressing a dynamic form.
| *1 | Front Pillar | *2 | Rear Pillar |
| *3 | Straight Line | - | - |
Exterior Design (Rear View)
In contrast with the strongly tapered cabin, the lower part of body creates an impressive low and wide stance.
As with the headlight assemblies on the front, the rear combination light assemblies wrap far around to the sides, emphasizing the wide feel of whole rear body and creating a sense of exhilaration.
| *1 | Rear Combination Light Assembly | - | - |