FUNCTION
The VVT-i system is designed to control the intake camshaft within a range of 40° (of Crankshaft Angle) to provide valve timing that is optimally suited to engine operating conditions. This improves torque in all the speed ranges as well as increasing fuel economy and reducing exhaust emissions.
The VVT-i system delivers excellent benefit vehicle states as shown below.
During Idling / At Light Load
| Objective | Effect |
| Eliminating overlap to reduce blow back to the intake side. | ·
Stabilized idling engine speed ·
Better fuel economy |
At Medium Load
| Objective | Effect |
| Increasing overlap to increase internal EGR to reduce pumping loss. | ·
Better fuel economy ·
Improved emission control |
In Low to Medium Speed Range with Heavy Load
| Objective | Effect |
| Advancing the intake valve close timing for volumetric efficiency improvement. | Improved torque in low to medium speed range |
In High Speed Range with Heavy Load
| Objective | Effect |
| Retarding the intake valve close timing for volumetric efficiency improvement. | Improved output |
At Low Temperatures
| Objective | Effect |
| Eliminating overlap to prevent blow back to the intake side from leading to the lean burning condition, and stabilize the idling speed at fast idle. | ·
Stabilized fast idling engine speed ·
Better fuel economy |
Upon Starting the Engine / Upon Stopping the Engine
| Objective | Effect |
| Eliminating overlap to reduce blow back to the intake side. | Improved startability |