Home › Engine / Hybrid System › 2NZ-FE ENGINE CONTROL › SFI SYSTEM › 2013.08–2016.10
NM30M0E _51 Engine / Hybrid System _018293 2NZ-FE ENGINE CONTROL _0090361 SFI SYSTEM DE DETAILS F

2NZ-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  VVT-i CONTROL  


OPERATION


a.

Using the engine speed, vehicle speed, intake air mass, throttle position and engine coolant temperature, the ECM can calculate optimal valve timing for each driving condition (target valve timing). The ECM uses this calculated timing to control the camshaft timing oil control valve assembly. In addition, the ECM uses signals from the cam position sensor and the crank position sensor to detect the actual valve timing, thus providing feedback control to achieve the target valve timing.

W103539E02
0.177,0.458 2.135,0.885 1.958,0.427 10 false Crank Position Sensor 0.177,0.958 2.083,1.438 1.906,0.479 10 false Intake Mass Air Flow Meter Sub-assembly 0.198,1.792 1.906,2.177 1.708,0.385 10 false Throttle Position Sensor 0.208,2.615 1.99,3.01 1.781,0.396 10 false E.F.I. Engine Coolant Temperature Sensor 0.198,3.417 1.969,3.76 1.771,0.344 10 false Cam Position Sensor 0.198,3.917 1.625,4.26 1.427,0.344 10 false Vehicle Speed Signal 3.375,0.906 4.802,1.25 1.427,0.344 10 false Target Valve Timing 3.385,2.813 4.125,3.042 0.74,0.229 10 false Correction 3.354,3.354 4.656,3.698 1.302,0.344 10 false Actual Valve Timing 4.333,1.677 5,2.021 0.667,0.344 10 false Feedback 5.104,1.25 5.833,1.76 0.729,0.51 10 false Duty-cycle Control 5.885,0.99 7,1.885 1.115,0.896 10 false Camshaft Timing Oil Control Valve Assembly 3.875,4.063 4.281,4.406 0.406,0.344 10 false ECM


b.

When the camshaft timing oil control valve assembly is operated as illustrated below by the advance signal from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction.

W112836C01
0.49,1.656 0.802,0.833 0.802,0.833 1,0.833 true 0.677,2.646 0.781,3.333 0.781,3.333 1.01,3.333 true 5.406,3.083 4.958,3.083 true 1.031,0.771 1.344,0.969 0.313,0.198 10 false *1 1.052,3.25 1.365,3.448 0.313,0.198 10 false *a 4.781,2.979 5.094,3.177 0.313,0.198 10 false *b 5.354,3.229 5.667,3.427 0.313,0.198 10 false *c 5.604,3.24 5.917,3.438 0.313,0.198 10 false *d 6.74,1.479 7.052,1.677 0.313,0.198 10 false *e
*1 Vane - -
*a Rotation Direction *b Oil Pressure
*c In *d Drain
*e from ECM - -



c.

When the camshaft timing oil control valve assembly is operated as illustrated below by the retard signal from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction.

W112837C01
0.729,1.75 1.01,1 1.01,1 1.208,1 true 0.948,2.573 1.135,3.323 1.135,3.323 1.323,3.323 true 5.146,3.01 4.75,3.01 true 1.375,3.25 1.688,3.406 0.313,0.156 10 false *1 1.24,0.927 1.552,1.083 0.313,0.156 10 false *a 4.552,2.938 4.865,3.094 0.313,0.156 10 false *b 5.375,3.292 5.688,3.448 0.313,0.156 10 false *c 5.104,3.281 5.417,3.438 0.313,0.156 10 false *d 6.781,1.573 7.094,1.729 0.313,0.156 10 false *e
*1 Vane - -
*a Rotation Direction *b Oil Pressure
*c In *d Drain
*e from ECM - -



d.

After reaching the target timing, the valve timing is held by keeping the camshaft timing oil control valve assembly in the neutral position unless the traveling state changes. This adjusts the valve timing at the desired target position and prevents the engine oil from running out when it is unnecessary.