CONSTRUCTION
The fuel injector assemblies are installed in the cylinder head sub-assembly to reduce the distance from the fuel injector assembly to the intake valve, thus it prevents the fuel from adhering to the intake port walls, and reduces exhaust emissions.
The routing of the water jacket in the cylinder head sub-assembly is optimized to achieve high cooling performance.
Through the use of the taper squish combustion chamber, the engine's knocking resistance and fuel efficiency have been improved.
| *1 | Fuel Injector Assembly | - | - |
| *a | Exhaust Side | *b | Intake Side |
| *c | Taper Squish | - | - |
|
Water Jacket | - | - |