CONSTRUCTION
The shimless type valve lifter is used to increase the amount of the valve lift.
The intake and exhaust camshafts are driven by a chain sub-assembly.
The VVT-i system is used to realize fuel economy, engine performance and reduce exhaust emissions. For details about the VVT-i system, see the SFI System in the 1NZ-FE ENGINE CONTROL section.
| *1 | Chain Sub-assembly | *2 | VVT-i Controller (Camshaft Timing Gear Assembly) |
| *3 | No. 1 Chain Tensioner Assembly | *4 | Chain Tensioner Slipper |
| *5 | No. 1 Chain Vibration Damper | *6 | No. 2 Camshaft (Exhaust) |
| *7 | Camshaft (Intake) | *8 | Valve Lifter |
| *9 | Valve | - | - |