CONSTRUCTION
The diameter and width of the pins and journals have been reduced, and the pins for the No. 1 and No. 4 cylinders have been made highly rigid to achieve a lightweight and low-friction performance.
The crankshaft has 5 journals and 4 balance weights.
A crank position sensor rotor is pressed into the crankshaft to realize an integrated configuration.
| *1 | Crank Position Sensor Rotor | *2 | Oil Hole |
| *3 | No. 1 Journal | *4 | No. 2 Journal |
| *5 | No. 3 Journal | *6 | No. 4 Journal |
| *7 | Crank Pin | *8 | No. 5 Journal |
| *9 | Balance Weight | - | - |