Home › Engine / Hybrid System › 2NZ-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM › 2013.08–2016.10
NM30M0E _51 Engine / Hybrid System _018296 2NZ-FE EMISSION CONTROL _0090367 EMISSION CONTROL SYSTEM CO CONTROL F

2NZ-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EVAPORATIVE EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the evaporative emission control system are as follows:

Component Function
Charcoal Canister Contains activated charcoal to absorb the fuel vapors that are created in the fuel tank assembly.
No. 1 Vacuum Switching Valve Assembly Opens and closes the valve based on signals from the ECM and controls the flow rate of the evaporative emission.
ECM Controls the No. 1 vacuum switching valve assembly in accordance with the signals from various sensors, in order to achieve a purge volume that suits the driving conditions.