Home › Engine / Hybrid System › 1NZ-FE LUBRICATION › LUBRICATION SYSTEM › 2013.08–2016.10
NM30M0E _51 Engine / Hybrid System _018290 1NZ-FE LUBRICATION _0090374 LUBRICATION SYSTEM GE GENERAL F

1NZ-FE LUBRICATION  LUBRICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and oil passes through an oil filter sub-assembly.


b.

A trochoid gear type oil pump, which is driven directly by the crankshaft, is provided in the front of the cylinder block sub-assembly.


c.

The oil filter sub-assembly is installed diagonally downward from the side of the cylinder block sub-assembly to realize excellent serviceability.


d.

The intake camshaft is provided with a VVT-i controller (camshaft timing gear assembly), and the cylinder head sub-assembly is provided with a camshaft timing oil control valve assembly. The VVT-i system is operated by the engine oil.

W111951C01
2.542,4.552 2.542,3.26 true 2.885,4.542 2.885,3.74 true 4.729,3.698 3.969,3.698 true 2.385,1.792 1.51,1.792 true 2.177,2.26 1.49,2.26 true 2.458,2.906 1.51,2.906 true 3.198,1.969 3.198,0.677 true 3.146,0.51 3.458,0.667 0.313,0.156 10 false *1 1.292,1.698 1.604,1.854 0.313,0.156 10 false *2 1.302,2.167 1.615,2.323 0.313,0.156 10 false *3 1.333,2.802 1.646,2.958 0.313,0.156 10 false *4 2.49,4.563 2.802,4.719 0.313,0.156 10 false *5 2.823,4.552 3.135,4.708 0.313,0.156 10 false *6 4.76,3.635 5.073,3.792 0.313,0.156 10 false *7
*1 Camshaft Timing Oil Control Valve Assembly *2 VVT-i Controller (Camshaft Timing Gear Assembly)
*3 No. 1 Chain Tensioner Assembly *4 Oil Jet
*5 Oil Pump *6 Oil Strainer Sub-assembly
*7 Oil Filter Sub-assembly - -