CONSTRUCTION
Centrifugal Fluid Pressure Canceling Mechanism
During shifting, in addition to the fluid pressure controlled by the valve body, the fluid pressure generated by centrifugal force (centrifugal fluid pressure) in chamber A also acts on the piston, and causes an increase in shifting shock generated by revolution differences between the input and output parts of the clutch by speeding the clutch engagement.
In order to improve the shifting characteristics for 4-3 and 3-4 shifting for which high responsiveness is required, a centrifugal fluid pressure canceling mechanism is applied.
| *1 | C1 Clutch | *2 | Chamber A |
| *3 | Chamber B | *4 | Piston |
The canceling fluid pressure canceling mechanism is a chamber (chamber B) located opposite to chamber A. By filling chamber B with shaft lubrication fluid, an equal amount of centrifugal fluid pressure is generated there and works against the centrifugal fluid pressure in chamber A.