Home › Drivetrain › U340E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LOCK SYSTEM › 2013.08–2016.10
NM30M0E _52 Drivetrain _018302 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0090417 SHIFT LOCK SYSTEM GE GENERAL F

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LOCK SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The key interlock device prevents the key from being pulled out after the ignition switch is turned OFF, unless the shift lever is moved to the P position. Thus, the driver is urged to park the vehicle in the P position.


b.

The shift lock mechanism prevents the shift lever from being shifted to a position other than the P position, unless the ignition switch is ON and the brake pedal is depressed. It prevents the vehicle from starting off suddenly.


c.

The shift lock control ECU Sub-assembly uses the P detection switch to detect the shift lever position, and receives input signals from the stop light switch assembly and ignition switch. Upon receiving these signals, the shift lock control ECU Sub-assembly turns on the key interlock solenoid and the shift lock solenoid in order to release the key interlock and shift lock.


d.

A shift lock release button, which manually overrides the shift lock mechanism, is used.