Home › Drivetrain › U441E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM › 2013.08–2016.10
NM30M0E _52 Drivetrain _018303 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0090418 AUTOMATIC TRANSAXLE SYSTEM GE GENERAL F

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The U441E 4-speed Super Electronically Controlled Transaxle (Super ECT) is used on the models with 2NZ-FE engine.


b.

A gate type shift lever is used.


c.

A shift lock system is used.



SPECIFICATION


Automatic Transaxle Assembly
Gear Ratio 1st 2.875
2nd 1.568
3rd 1.000
4th 0.696
Reverse 2.300
Differential Gear Ratio*1 4.375
Fluid Capacity*2 5.6 Liters (5.9 US qts, 4.9 Imp. qts)
Fluid Type TOYOTA Genuine ATF Type T-IV
Weight (Reference)*3 56.3 kg (123.8 lb)

HINT:

*1: Counter gear ratio included.

*2: Differential included.

*3: The weight shown is the weight of the part fully filled with fluid.


Friction Engagement Components and 1-way Clutch
C1 Forward Clutch No. of Discs 4
C2 Direct Clutch 2
C3 Reverse Clutch 2
B1 OD and 2nd Brake 2
B2 2nd Brake 2
B3 1st and Reverse Brake 4
F1 No. 1 1-way Clutch No. of Sprags 12
F2 No. 2 1-way Clutch No. of Rollers 15

Planetary Gear and Counter Gear
Planetary Gear No. of Planetary Sun Gear Teeth 24
No. of Rear Planetary Sun Gear Teeth 30
No. of Long Pinion Gear Teeth 20
No. of Short Pinion Gear Teeth 19
No. of Planetary Ring Gear Teeth 69
Counter Gear No. of Counter Drive Gear Teeth 44
No. of Counter Driven Gear Teeth 45

Torque Converter Assembly
Torque Converter Type 3-element, 1-step, 2-phase (With Lock-up Mechanism)
Stall Torque Ratio 2.0