OPERATION
Shift Solenoid Valve SLT
In order to supply hydraulic pressure proportional to the current that flows to the solenoid coil, shift solenoid valve SLT is provided.
The valve linearly controls the line pressure, secondary pressure and accumulator backpressure based on the signals from the ECM.
| Shift Solenoid Valve | Function |
|---|---|
| SLT | ·
Line pressure control ·
Secondary pressure control ·
Accumulator backpressure control |
Shift Solenoid Valve ST
This shift solenoid valve uses a 2-way solenoid valve.
A filter is provided at the tip of the solenoid valve to further improve operational reliability.
There are 2 types of shift solenoid valve ST. The valve structures are different, but the basic operations are the same.
| *1 | Filter | - | - |
| *a | Off Condition | *b | On Condition |
|
Line Pressure |
|
Drain |
|
Plunger Moving Direction |
|
Cylinder Ball Moving Direction |
| Shift Solenoid Valve | Function |
|---|---|
| ST | 3-4 and 4-3 shift timing valves switching |
Shift Solenoid Valve S1, S2 and SL
These shift solenoid valves use a 2-way solenoid valve.
A filter is provided at the tip of the solenoid valve to further improve operational reliability.
There are 2 types of shift solenoid valve, of which the valve structures are different but the basic operations are the same, for S1, S2 and SL respectively.
| *1 | Filter | - | - |
| *a | Off Condition | *b | On Condition |
|
Line Pressure |
|
Drain |
|
Plunger Moving Direction |
|
Cylinder Ball Moving Direction |
| Shift Solenoid Valve | Function |
|---|---|
| S1 | ·
2-3 shift valve switching ·
C2 clutch control |
| S2 | ·
1-2 and 3-4 shift valves switching ·
C1 clutch and 2-brake (B1 and B2) control |
| SL | Lock-up clutch control |